Engineering Performance

PROJECTS

Oil well cement early strength agent TC-1

Can be used for 30 ℃ ~ 150 ℃ low density or high density cement system.

Key words:

Details

Early strength agent (TC)

1. performance indicators

Table 1 Physical and chemical performance index

Project

Technical indicators

Liquid

Powder

Appearance

Uniform, light yellow liquid without mildew

No damp, gray powder

Solid content,%

≥40

--

Density (20 ℃ ± 1 ℃), g/cm3

≥ 1.20

--

Fineness (0.315mm sieve residue),%

--

<12

 

Table 2 Cement Slurry Formula of Early Strength Agent

Name

Specifications

Dosage, g

Proportion,%

Cement

Grade G cement (high sulfur resistance) conforming to national standard 10238

700

100

Water

Mixing water (with liquid admixture)

308 (inclusive)

44 (inclusive)

early strength agent

TC-1 liquid

Choose according to the use requirements

42

6

TC-2 powder

21

3

Defoamer

BP-1A defoamer liquid (adding defoamer to the cement slurry system using early strength agent is beneficial to eliminate bubbles and improve strength.)

≥ 2.1

≥ 0.3

Table 3 Cement Slurry Performance Requirements of Accelerating Early Strength Agent

Project

experimental conditions

Technical indicators

Thickening time ratio

32 ℃/17min,8.3Mpa

≤0.5

Initial consistency, Bc

≤ 30

6h compressive strength

39 ℃, normal pressure

≥ 6.0

24h compressive strength ratio

≥ 1.0

Thickening time ratio: refers to the ratio of the thickening time of cement slurry added with early strength agent to the thickening time of pure cement paste. Compressive strength ratio: refers to the ratio of the compressive strength of cement stone added with early strength agent to the compressive strength of pure cement paste cement stone.

2. features

Can be used for 30 ℃ ~ 150 ℃ low density or high density cement system. The ratio of the compressive strength of cement stone added with early strength agent to the compressive strength of pure cement paste is greater than 1. This product does not contain CaCl2, has no adverse effect on the late strength of cement stone, and has good compatibility with other admixtures.

3. Usage and Dosage

It can be added into the slurry water in proportion and circulated evenly. See Table 2 for recommend dosage.

4. storage and transportation

Powder: net weight 25±0.5 kg/bag, stored in a cool and dry place, avoid sun and rain, puncture. Transport by regular chemicals. Aqueous solution: net weight 25±0.5kg/barrel, stored in a cool and dry place to avoid sun and rain and puncture. Transport by regular chemicals.

5. considerations

This product is non-flammable, non-toxic, contact with the eyes, skin is slightly irritating. In case of contact with eyes and skin, flush with fresh water.

 

Safety Instruction for Oil Well Cement Early Strength Agent (TC-1)

Product Name: Oil Well Water Early Strength (TC-1) Prepared in accordance with GB/T16483 GB/T17519 Revision Date: June 6, 2014SDSNumber: B51.1049-2013 Originally Prepared: January 9, 2013 Version: 1.2

Part 1 Chemicals and Enterprise Identification

Chemical Chinese name: oil well cement early strength agent (TC-1)

English name of chemicals:

Company: Sichuan Hongsheng Petroleum Engineering Technology Service Co., Ltd.

Address: No.3, Building 3, Gaoxin Jingyuan, Xianhe Avenue, Tianchi Town, Lezhi County, Sichuan Province

Postal Code: 641500 Fax:028-23239080

Contact Phone:028-23239080

E-mail address:hs.cement@163.com

enterprise emergency telephone:028-23239080

Product recommend and limited use: used for oil field cementing cement slurry, there is to improve the early strength of cement stone.

Part 2 Hazard Overview

Light yellow liquid liquid. Harmful if swallowed. Irritant reaction in contact with skin.

PART 3 INFORMATION INFORMATION

Product name: flushing agent for cementing (CX-1)

Name

EC No.

CAS No.

Content%

Category

Triethanolamine

/

102-71-6

 

 

organic calcium salt

/

90194-36-8

 

 

Part 4 First Aid Measures

First aid: □ Skin contact: Take off contaminated clothing and rinse thoroughly with soap and water. Eye contact: immediately lift the eyelid, rinse with flowing water. □ Inhalation: leave the site and go to the fresh air place. Artificial respiration if necessary. Seek medical attention. □ Ingestion: Drink plenty of warm water to induce vomiting. Seek medical attention.

Part 5 Fire Protection Measures

Dangerous characteristics: not easy to burn, explosion. Hazardous combustion products: None. Fire extinguishing method: none.

Part 6 Emergency Treatment of Leakage

Emergency treatment: emergency treatment personnel shall be equipped with work clothes. Do not touch the leak directly. Small amount of leakage: collected in a dry, clean, covered container. Large leakage: collection and recycling or transportation to waste disposal site.

PART 7 OPERATION, DISPOSAL AND STORAGE

Operation Precautions:Closed operation to provide adequate local exhaust. Operators must be specially trained and strictly abide by the operating procedures. Operators wear rubber gloves. Precautions for storage: Store in a cool and ventilated warehouse.

SECTION 8 Exposure Control/Personal Protection

Fire control: equipped with the corresponding variety and quantity of fire fighting equipment. Respiratory system protection: maintain good ventilation. Eye protection: to prevent splashing into the eyes. Body Protection: Wear overalls and rubber gloves. Other protection: smoking, eating and drinking are prohibited at the work site. Completely clean the job.

Part 9 Physical and Chemical Properties

Project

Technical indicators

Appearance

Uniform, light yellow liquid without mildew

Solid content,%

≥40

Density (20 ℃ ± 1 ℃), g/cm3

≥ 1.20

Part 10 Stability and Reactivity

Very stable at room temperature.

Part 11 Toxicological Information

None

Part 12 Ecological Information

Ecotoxicity: No biodegradability:No biodegradability: no other harmful effects: the substance has no record of harm to the environment, and attention should be paid to the protection of water bodies during use.

PART 13 DISPOSAL

Abandoned products are not dangerous. Handle in accordance with the relevant policies and regulations (measures) of the government and regulatory agencies

PART 14 TRANSPORTATION INFORMATION

Transportation should be carried out in strict accordance with the national regulations of the "cargo transport rules" for assembly, stacking height of not more than two layers, the process should be carried out with care, should prevent falling, away from heat, check the packaging container is complete, sealed, to ensure that the container does not leak, collapse, fall, do not damage. During transportation, it shall be protected from sun exposure and rain.

SECTION 15 REGULATIONS INFORMATION

Regulatory information: regulations on the safety management of chemical dangerous goods (promulgated by the State Council on February 17, 1987), detailed rules for the implementation of the regulations on the safety management of chemical dangerous goods ([1992] No. 677), regulations on the safe use of chemicals in workplaces ([1996] No. 423 issued by the Ministry of Labor) and other regulations have made corresponding provisions on the safe use, production, storage, transportation, loading and unloading of chemical dangerous goods.

Section 16 Other Information

Disclaimer The information in the MSDS relates only to a particular material and is not intended for use in combination with other materials or in other (manufacturing) processes. For the best interests of the company and intellectual property rights, the data currently listed in the information are accurate and reliable. However, no warranty, warranty or representation is accurate, reliable and complete. Because it is the user's own use, the user should be in accordance with the product description, information to meet their own requirements, this is the responsibility of the user.

HOT PRODUCTS

Oil well cement drag reducing agent polyethylene sulfonate BS300-J

This product has efficient dispersion performance, can make the flow index of cement slurry close to 1, the consistency coefficient and yield value significantly reduced, easy to achieve at low speed, low pump pressure in the turbulent flow displacement cementing, is conducive to improve the quality of cementing and protect the oil and gas layer. BS300-J type oil well cement drag reducing agent has excellent high temperature resistance, 180 ℃ still has good dispersion, BS300-J type oil well cement drag reducing agent has good compatibility with other commonly used additives, and has no adverse effect on other properties of cement slurry and cement stone.

Oil Well Cement Dispersant BS300-J

Oil Well Cement Dispersant BS300-J

This product has efficient dispersion performance, can make the flow index of cement slurry close to 1, the consistency coefficient and yield value significantly reduced, easy to achieve at low speed, low pump pressure in the turbulent flow displacement cementing, is conducive to improve the quality of cementing and protect the oil and gas layer. BS300-J-type oil well cement latex dispersant has excellent high temperature resistance and good dispersibility at 180 ℃. BS300-J-type oil well cement latex dispersant has certain dewatering effect and good compatibility with other commonly used admixtures, and has no adverse effect on other properties of cement slurry and cement stone.

Oil well flushing agent CXJ-1

CXJ-1 oil-based flushing agent for cementing is composed of fatty alcohol polyoxyethylene ether, penetrating agent JFC and organic solvent as main materials and surfactant as auxiliary materials.

Fiber XW-2 for oil well cement

This product has high toughness, corrosion resistance, no static electricity, high temperature resistance and other properties;

TC-18 of flow pattern regulator for oil well cement

CXJ-1 with fatty alcohol polyoxyethylene ether, penetrating agent JFC, organic solvent as the main material.

KW-2 of Antifouling Agent for Oil Well Cement

The anti-thickening agent of the pre-liquid for cementing is KW-2 used in the pre-liquid, which can shield a variety of metal ions and polar functional groups to prevent cross-linking and thickening. It is beneficial to the adjustment of compatibility experiment and the safe construction of cementing.

KW-1 of Antifouling Agent for Oil Well Cement

The anti-thickening agent of the pre-liquid for cementing is KW-1 used in the pre-liquid, which can shield a variety of metal ions and polar functional groups to prevent cross-linking and thickening. It is beneficial to the adjustment of compatibility experiment and the safe construction of cementing.

Water loss reducer BS100T for oil well cement

BS100T is a polymer oil well cement slurry fluid loss reducer with excellent water loss control ability. Good versatility, can be used in a variety of cement slurry system, and other additives with good compatibility.

BS300-1 of drag reducing agent for oil well cement

BS300-1 can significantly reduce the consistency of cement slurry and improve the rheological properties of cement slurry.

Online
Message


If you have any suggestions or feedback to our company, please fill in the relevant information on this page and submit it. A staff member will contact you in time, or please call us directly.

Telephone

Submit Message